Opis

Amplifier:

Continuous power: (total harmonic distortion)
8 ohms: 2 x 60 watts, at 40- 20 khz, less than 0.2%
4 ohms: 2 x 80 watts, 1 khz (DIN)
THD:
0.2% at rated power
0.1% at 30 watts
Damping factor: 50 to 8 ohms
Phono overload: 120 mV, RMS at 1 khz, 0.2% TDH
Frequency response: 20 - 30,000 Hz, ± 1 dB
Signal to Noise Ratio (IHF-A):
Phono 80 dB
Line: 100 dB
Tone control:
Bass: ± 10 dB at 100 Hz
Altitudes: ± 10 dB at 10,000 Hz
Loudness (-30 dB): yes
+ 7dB at 70Hz
+ 5dB at 10kHz
Muting: yes
Selective tone: yes
(Selective tone control - so that the very low and high frequencies are reproduced more clearly)
Sensitivity and impedance:
Phono: 2.5 mV / 50 kOhm,
CD / Tape Play: 150 mV / 50 kOhm
Tape Rec: 150 mV / 3.5 kOhm
Direct / Line Straight: yes?

Tuner:

Reception: AM (MW), FM (FM)
frequencies:
FM: 87.5 - 108.0 MHz (50 khz steps)
AM: 522 - 1611 kHz (9 khz steps)
Frequency response: 30 - 15,000 Hz +/- 1.5 dB
Input sensitivity FM:
Mono: 12.4 dBf, 1.2 μ V, 75 ohms (26 dB S / N, 40 kHz stroke)
Stereo: 19.2 dBf, 2.5 μ V, 75 ohms (46 dB S / N, 40 kHz stroke)
Total harmonic distortion FM:
Mono: 0.15%
Stereo: 0.30%
Total harmonic distortion AM: 0.8%
Signal-to-noise ratio FM:
Mono: 70 dB
Stereo: 65 dB
Signal to noise ratio AM: 40 dB
Channel separation: 40 dB at 1 kHz
AM suppression ratio: 50 dB
Image frequency attenuation: 85 dB
IF attenuation: 90 dB
Station memory: 40?